Digital Counter using U452 USB Data Acquisition Card

Digital Counter using U452.

Today we will see how we can make a very easy yet very versatile 8 digit digital counter using U452 USB data acquisition board.

U452 USB Data Acquisition Card can be used to make a very useful Digital Counter only by adding a simple push to on microswitch & a small 0.1 mfd disc capacitor.

Following are the main features of Digital Counter –

1. 8 digit counter
2. UP & Down Count facility.
3. Counting speed can be up to 30,000 counts per minute.
4. Includes Batch Counting facility.
5. Any time counter Stop & Reset facility.

Just add a simple switch to Channel 1 input pin of U452 as shown in following picture.

digital counter using U452 from iknowvationsFollowing shows a close up of push to on micro switch connected to U452.

close up of microswitch connected to U452A disc capacitor of 0.1 microfarad is connected in parallel to micro switch terminals to debounce the contacts. Adding micro switch to U452 is very simple.

Connect a wire from one terminal of micro switch to any input channel pin of U452 and from other terminal to ground. As any channel of U452 in Input mode is automatically pulled up by a weak resistor.

So when switch is open, getting input from connected channel will provide “1” – High input value. When switch is pressed, it will short the input pin to the ground & will provide “0” value.

This values can be monitored periodically by PC software using timer. This data is used to make digital counter.

We have developed such Digital Counter – iKount using VC# for you. You can download this software free from our Download section.

Following are some of the screenshots of iKount in action.

iKount digital counter using U452 a iknowvations.in

iKount digital counter using U452 b iknowvations.in

iKount digital counter using U452 c iknowvations.in
This is an example of how to make a sophisticated Digital Counter with the help of U452 – USB Data Acquisition Card.

You can download iKount – Digital Counter software free from our Download Section. Just download the zip file into any suitable folder, setup the iKount , connect U452 and you are ready to go !

For more information on iKount Digital Counter please visit iKount Digital Counter page.

If you are interested in source code of iKount, please contact our support team.

You can have more information of U452 USB Data Acquisition Card by clicking this link.

To buy U452 Data Acquisition Card please visit our Iknowvations Shoppee.

Content Protection by DMCA.com

Want to share a thought ?