Digital Counter using iRS-2R.
Today we will see how we can make a very easy yet very versatile 8 digit digital counter using iRS-2R RS232 data acquisition board.
iRS-2R RS232 Data Acquisition Card can be used to make a very useful Digital Counter only by adding a simple push to on microswitch & a small 0.1 mfd disc capacitor.
Following are the main features of Digital Counter –
1. 8 digit counter
2. UP & Down Count facility.
3. Counting speed can be up to 30,000 counts per minute.
4. Includes Batch Counting facility.
5. Any time counter Stop & Reset facility.
Just add a simple switch to Channel 1 input pin of iRS-2R as shown in following picture.
Connect a wire from one terminal of micro switch to any input channel pin of iRS-2R and from other terminal to ground. Any channel of iRS-2R in Input mode is automatically pulled up by a weak resistor.
So when switch is open, getting input from connected channel will provide “1″ – High input value. When switch is pressed, it will short the input pin to the ground & will provide “0″ value.
This values can be monitored periodically by PC software using timer. This data is used to make digital counter.
We have developed such Digital Counter – iKount using VC# for you. You can download this software free from our Download section.
Following are some of the screenshots of iKount in action.
This is an example of how to make a sophisticated Digital Counter with the help of iRS-2R – RS232 based Data Acquisition Card.
You can download iKount – Digital Counter software free from our Download Section. Just download the zip file into any suitable folder, setup the iKount , connect iRS-2R and you are ready to go !
For more information on iKount Digital Counter please visit iKount Digital Counter page.
If you are interested in source code of iKount, please contact our support team.
You can have more information of iRS-2R RS232 Data Acquisition Card by clicking this link.
To buy iRS-2R Data Acquisition Card please visit our Iknowvations Shoppee.