8 channel infrared IR remote control relay board with Digital outputs iUB-8R-IR launched.
We have launched our latest 8 channel infrared IR remote control relay board iUB-8R-IR. This board has not only 8 relays as AZ8CR-3 but also has 9 additional digital outputs on the board ( on iUB-8R-IRO) .
With remote handset, not only you can operate 8 relays but also make digital outputs high or low. This can be used to operate additional 9 relays or these outputs can be used for other purposes. For example making LEDs on/off.
Apart from this, it has got additional 8 power output pins. These pins can be used to operate any other load up to 500 mA at 7 to 12 V DC each.
There is a jumper near power pins, which can be used to power either Relays or Power pins. These power pins can be used to operate many other loads like DC motors, actuators, LED strips, small pumps etc
If you want to operate only power pins then you can use 7 to 12 V DC while operating Relays require 12 V DC only.
Controlling the new IR remote control relay board is very easy.
Apart from LED indication for each relay, there is also Valid IR signal indicator on this 8 channel infrared IR remote control board – iUB-8R-IR.
The new 8 channel infrared IR remote control board has two variants – iUB-8R-IR is only with relays while iUB-8R-IRO is with additional 9 digital outputs.
You can have these boards from our online shopee at http://shopee.iknowvations.in